Installation¶

PIP¶

$ pip install enlighten

RPM¶

Fedora and EL8 (RHEL/CentOS)¶

(EPEL repositories must be configured for EL8)

$ dnf install python3-enlighten

EL7 (RHEL/CentOS)¶

(EPEL repositories must be configured)

$ yum install python2-enlighten
$ yum install python36-enlighten

PKG¶

Arch Linux¶

$ pacman -S python-enlighten

DEB¶

Debian and Ubuntu¶

$ apt-get install python3-enlighten

Examples¶

Basic¶

For a basic status bar, invoke the Counter class directly.

import time
import enlighten

pbar = enlighten.Counter(total=100, desc='Basic', unit='ticks')
for num in range(100):
    time.sleep(0.1)  # Simulate work
    pbar.update()

Advanced¶

To maintain multiple progress bars simultaneously or write to the console, a manager is required.

Advanced output will only work when the output stream, sys.stdout by default, is attached to a TTY. get_manager() can be used to get a manager instance. It will return a disabled Manager instance if the stream is not attached to a TTY and an enabled instance if it is.

import time
import enlighten

manager = enlighten.get_manager()
ticks = manager.counter(total=100, desc='Ticks', unit='ticks')
tocks = manager.counter(total=20, desc='Tocks', unit='tocks')

for num in range(100):
    time.sleep(0.1)  # Simulate work
    print(num)
    ticks.update()
    if not num % 5:
        tocks.update()

manager.stop()

Counters¶

The Counter class has two output formats, progress bar and counter.

The progress bar format is used when a total is not None and the count is less than the total. If neither of these conditions are met, the counter format is used:

import time
import enlighten

counter = enlighten.Counter(desc='Basic', unit='ticks')
for num in range(100):
    time.sleep(0.1)  # Simulate work
    counter.update()

Status Bars¶

Status bars are bars that work similarly to progress similarly to progress bars and counters, but present relatively static information. Status bars are created with Manager.status_bar.

import enlighten
import time

manager = enlighten.get_manager()
status_bar = manager.status_bar('Static Message',
                                color='white_on_red',
                                justify=enlighten.Justify.CENTER)
time.sleep(1)
status_bar.update('Updated static message')
time.sleep(1)

Status bars can also use formatting with dynamic variables.

import enlighten
import time

manager = enlighten.get_manager()
status_format = '{program}{fill}Stage: {stage}{fill} Status {status}'
status_bar = manager.status_bar(status_format=status_format,
                                color='bold_slategray',
                                program='Demo',
                                stage='Loading',
                                status='OKAY')
time.sleep(1)
status_bar.update(stage='Initializing', status='OKAY')
time.sleep(1)
status_bar.update(status='FAIL')

Status bars, like other bars can be pinned. To pin a status bar to the top of all other bars, initialize it before any other bars. To pin a bar to the bottom of the screen, use position=1 when initializing.

See StatusBar for more details.

Color¶

Status bars and the bar component of a progress bar can be colored by setting the color keyword argument. See Series Color for more information about valid colors.

import time
import enlighten

counter = enlighten.Counter(total=100, desc='Colorized', unit='ticks', color='red')
for num in range(100):
    time.sleep(0.1)  # Simulate work
counter.update()

Additionally, any part of the progress bar can be colored using counter formatting and the color capabilities of the underlying Blessed Terminal.

import enlighten

manager = enlighten.get_manager()

# Standard bar format
std_bar_format = u'{desc}{desc_pad}{percentage:3.0f}%|{bar}| ' + \
                 u'{count:{len_total}d}/{total:d} ' + \
                 u'[{elapsed}<{eta}, {rate:.2f}{unit_pad}{unit}/s]'

# Red text
bar_format = manager.term.red(std_bar_format)

# Red on white background
bar_format = manager.term.red_on_white(std_bar_format)

# X11 colors
bar_format = manager.term.peru_on_seagreen(std_bar_format)

# RBG text
bar_format = manager.term.color_rgb(2, 5, 128)(std_bar_format)

# RBG background
bar_format = manager.term.on_color_rgb(255, 190, 195)(std_bar_format)

# RGB text and background
bar_format = manager.term.on_color_rgb(255, 190, 195)(std_bar_format)
bar_format = manager.term.color_rgb(2, 5, 128)(bar_format)

# Apply color to select parts
bar_format = manager.term.red(u'{desc}') + u'{desc_pad}' + \
             manager.term.blue(u'{percentage:3.0f}%') + u'|{bar}|'

# Apply to counter
ticks = manager.counter(total=100, desc='Ticks', unit='ticks', bar_format=bar_format)

If the color option is applied to a Counter, it will override any foreground color applied.

Multicolored¶

The bar component of a progress bar can be multicolored to track multiple categories in a single progress bar.

The colors are drawn from right to left in the order they were added.

By default, when multicolored progress bars are used, additional fields are available for bar_format:

count_n (int) - Current value of count

count_0(int) - Remaining count after deducting counts for all subcounters

percentage_n (float) - Percentage complete

percentage_0(float) - Remaining percentage after deducting percentages for all subcounters

When add_subcounter() is called with all_fields set to True, the subcounter will have the additional fields:

eta_n (str) - Estimated time to completion

rate_n (float) - Average increments per second since parent was created

More information about bar_format can be found in the Format section of the API.

One use case for multicolored progress bars is recording the status of a series of tests. In this example, Failures are red, errors are white, and successes are green. The count of each is listed in the progress bar.

import random
import time
import enlighten

bar_format = u'{desc}{desc_pad}{percentage:3.0f}%|{bar}| ' + \
            u'S:{count_0:{len_total}d} ' + \
            u'F:{count_2:{len_total}d} ' + \
            u'E:{count_1:{len_total}d} ' + \
            u'[{elapsed}<{eta}, {rate:.2f}{unit_pad}{unit}/s]'

success = enlighten.Counter(total=100, desc='Testing', unit='tests',
                            color='green', bar_format=bar_format)
errors = success.add_subcounter('white')
failures = success.add_subcounter('red')

while success.count < 100:
    time.sleep(random.uniform(0.1, 0.3))  # Random processing time
    result = random.randint(0, 10)

    if result == 7:
        errors.update()
    if result in (5, 6):
        failures.update()
    else:
        success.update()

A more complicated example is recording process start-up. In this case, all items will start red, transition to yellow, and eventually all will be green. The count, percentage, rate, and eta fields are all derived from the second subcounter added.

import random
import time
import enlighten

services = 100
bar_format = u'{desc}{desc_pad}{percentage_2:3.0f}%|{bar}|' + \
            u' {count_2:{len_total}d}/{total:d} ' + \
            u'[{elapsed}<{eta_2}, {rate_2:.2f}{unit_pad}{unit}/s]'

initializing = enlighten.Counter(total=services, desc='Starting', unit='services',
                                color='red', bar_format=bar_format)
starting = initializing.add_subcounter('yellow')
started = initializing.add_subcounter('green', all_fields=True)

while started.count < services:
    remaining = services - initializing.count
    if remaining:
        num = random.randint(0, min(4, remaining))
        initializing.update(num)

    ready = initializing.count - initializing.subcount
    if ready:
        num = random.randint(0, min(3, ready))
        starting.update_from(initializing, num)

    if starting.count:
        num = random.randint(0, min(2, starting.count))
        started.update_from(starting, num)

    time.sleep(random.uniform(0.1, 0.5))  # Random processing time

Additional Examples¶

basic - Basic progress bar
context manager - Managers and counters as context managers
floats - Support totals and counts that are floats
multicolored - Multicolored progress bars
multiple with logging - Nested progress bars and logging
FTP downloader - Show progress downloading files from FTP
Multiprocessing queues - Progress bars with queues for IPC

Customization¶

Enlighten is highly configurable. For information on modifying the output, see the Series and Format sections of the Counter documentation.

Common Patterns¶

Enable / Disable¶

A program may want to disable progress bars based on a configuration setting as well as if output redirection occurs.

import sys
import enlighten

# Example configuration object
config = {'stream': sys.stdout,
          'useCounter': False}

enableCounter = config['useCounter'] and stream.isatty()
manager = enlighten.Manager(stream=config['stream'], enabled=enableCounter)

The get_manager() function slightly simplifies this

import enlighten

# Example configuration object
config = {'stream': None,  # Defaults to sys.stdout
          'useCounter': False}

manager = enlighten.get_manager(stream=config['stream'], enabled=config['useCounter'])

Context Managers¶

Both Counter and Manager can be used as context managers.

import enlighten

SPLINES = 100

with enlighten.Manager() as manager:
    with manager.counter(total=SPLINES, desc='Reticulating:', unit='splines') as retic:
        for num in range(SPLINES + 1):
            retic.update()

Automatic Updating¶

Both Counter and Both SubCounter instances can be called as functions on one or more iterators. A generator is returned which yields each element of the iterables and then updates the count by 1.

Note

When a Counter instance is called as a function, type checking is lazy and won't validate an iterable was passed until iteration begins.

import time
import enlighten

flock1 = ['Harry', 'Sally', 'Randy', 'Mandy', 'Danny', 'Joe']
flock2 = ['Punchy', 'Kicky', 'Spotty', 'Touchy', 'Brenda']
total = len(flock1) + len(flock2)

manager = enlighten.Manager()
pbar = manager.counter(total=total, desc='Counting Sheep', unit='sheep')

for sheep in pbar(flock1, flock2):
    time.sleep(0.2)
    print('%s: Baaa' % sheep)

User-defined fields¶

Both Counter and Both StatusBar accept user defined fields as keyword arguments at initialization and during an update. These fields are persistent and only need to be specified when they change.

In the following example, source is a user-defined field that is periodically updated.

import enlighten
import random
import time

bar_format = u'{desc}{desc_pad}{source} {percentage:3.0f}%|{bar}| ' + \
             u'{count:{len_total}d}/{total:d} ' + \
             u'[{elapsed}<{eta}, {rate:.2f}{unit_pad}{unit}/s]'
manager = enlighten.get_manager(bar_format=bar_format)

bar = manager.counter(total=100, desc='Loading', unit='files', source='server.a')
for num in range(100):
    time.sleep(0.1)  # Simulate work
    if not num % 5:
        bar.update(source=random.choice(['server.a', 'server.b', 'server.c']))
    else:
        bar.update()

For more information, see the Counter Format and StatusBar Format sections.

Frequently Asked Questions¶

Why is Enlighten called Enlighten?¶

A progress bar's purpose is to inform the user about an ongoing process. Enlighten, meaning "to inform", seems a fitting name. (Plus any names related to progress were already taken)

Is Windows supported?¶

Enlighten has supported Windows since version 1.3.0.

Windows does not currently support resizing.

Enlighten also works relatively well in Linux-like subsystems for Windows such as Cygwin or Windows Subsystem for Linux.

Is PyCharm supported?¶

PyCharm uses multiple consoles and the behavior differs depending on how the code is called.

Enlighten works natively in the PyCharm command terminal.

To use Enlighten with Run or Debug, terminal emulation must be enabled. Navigate to Run -> Edit Configurations -> Templates -> Python and select Emulate terminal in output console.

The PyCharm Python console is currently not supported because sys.stdout does not reference a valid TTY.

Can you add support for _______ terminal?¶

We are happy to add support for as many terminals as we can. However, not all terminals can be supported. There a few requirements.

The terminal must be detectable programmatically

We need to be able to identify the terminal in some reasonable way and differentiate it from other terminals. This could be through environment variables, the platform module, or some other method.

A subset of terminal codes must be supported

While these codes may vary among terminals, the capability must be provided and activated by printing a terminal sequence. The required codes are listed below.

move / CUP - Cursor Position

hide_cursor / DECTCEM - Text Cursor Enable Mode

show_cursor / DECTCEM - Text Cursor Enable Mode

csr / DECSTBM - Set Top and Bottom Margins

clear_eos / ED - Erase in Display

clear_eol / EL - Erase in Line

feed / CUD - Cursor Down (Or scroll with linefeed)

Terminal dimensions must be detectable

The height and width of the terminal must be available to the running process.

API Reference¶

Classes¶

class enlighten.Manager(stream=None, counter_class=Counter, **kwargs)¶

Parameters:

stream (file object) -- Output stream. If None, defaults to sys.stdout
counter_class (class) -- Progress bar class (Default: Counter)
set_scroll (bool) -- Enable scroll area redefinition (Default: True)
companion_stream (file object) -- See companion_stream below. (Default: None)
enabled (bool) -- Status (Default: True)
no_resize (bool) -- Disable resizing support
threaded (bool) -- When True resize handling is deferred until next write (Default: False unless multiple threads are detected)
kwargs (Dict[str, Any]) -- Any additional keyword arguments will be used as default values when counter() is called.

Manager class for outputting progress bars to streams attached to TTYs

Progress bars are displayed at the bottom of the screen with standard output displayed above.

companion_stream

A companion stream is a file object that shares a TTY with the primary output stream. The cursor position in the companion stream will be moved in coordination with the primary stream.

If the value is None, sys.stdout and sys.stderr will be used as companion streams. Unless explicitly specified, a stream which is not attached to a TTY (the case when redirected to a file), will not be used as a companion stream.

counter(position=None, **kwargs)¶

Parameters:	position (int) -- Line number counting from the bottom of the screen autorefresh (bool) -- Refresh this counter when other bars are drawn kwargs (Dict[str, Any]) -- Any additional keyword arguments are passed to `Counter`
Returns:	Instance of counter class
Return type:	`Counter`

Get a new progress bar instance

If position is specified, the counter's position will be pinned. A ValueError will be raised if position exceeds the screen height or has already been pinned by another counter.

If autorefresh is True, this bar will be redrawn whenever another bar is drawn assuming it had been min_delta seconds since the last update. This is usually unnecessary.

Note

Counters are not automatically drawn when created because fields may be missing if subcounters are used. To force the counter to draw before updating, call refresh().

status_bar(*args, **kwargs)¶

Parameters:	position (int) -- Line number counting from the bottom of the screen autorefresh (bool) -- Refresh this counter when other bars are drawn kwargs (Dict[str, Any]) -- Any additional keyword arguments are passed to `StatusBar`
Returns:	Instance of status bar class
Return type:	`StatusBar`

Get a new status bar instance

If position is specified, the counter's position can change dynamically if additional counters are called without a position argument.

If autorefresh is True, this bar will be redrawn whenever another bar is drawn assuming it had been min_delta seconds since the last update. Generally, only need when elapsed is used in status_format.

stop()¶

Clean up and reset terminal

This method should be called when the manager and counters will no longer be needed.

Any progress bars that have leave set to True or have not been closed will remain on the console. All others will be cleared.

Manager and all counters will be disabled.

class enlighten.Counter(**kwargs)¶

Parameters:

bar_format (str) -- Progress bar format, see Format below
count (int) -- Initial count (Default: 0)
counter_format (str) -- Counter format, see Format below
color (str) -- Series color as a string or RGB tuple see Series Color
desc (str) -- Description
enabled (bool) -- Status (Default: True)
fill (str) -- Fill character used for counter_format (Default: ' ')
fields (dict) -- Additional fields used for formatting
leave (True) -- Leave progress bar after closing (Default: True)
manager (Manager) -- Manager instance. Creates instance if not specified.
min_delta (float) -- Minimum time, in seconds, between refreshes (Default: 0.1)
offset (int) -- Number of non-printable characters to account for when formatting
series (sequence) -- Progression series, see Series below
stream (file object) -- Output stream. Not used when instantiated through a manager
total (int) -- Total count when complete
unit (str) -- Unit label

Progress bar and counter class

A Counter instance can be created with the Manager.counter() method or, when a standalone progress bar for simple applications is required, the Counter class can be called directly. The output stream will default to sys.stdout unless stream is set.

Note

With the default values for bar_format and counter_format, floats can not be used for total, count, or provided to update(). In order to use floats, provide custom formats to bar_format and counter_format. See Format below.

Series

The progress bar is constructed from the characters in series. series must be a sequence (str, list, tuple) containing single characters.

Default progress series (series):
' ▏▎▍▌▋▊▉█'
The first character is the fill character. When the count is 0, the bar will be made up of only this character. In the example below, characters 5 through 9 are fill characters.

The last character is the full character. When the count is equal to total, the bar will be made up of only this character. In the example below, characters 0 through 3 are full characters.

The remaining characters are fractional characters used to more accurately represent the transition between the full and fill characters. In the example below, character 4 is a fractional character.
'45% |████▋     |'
     '0123456789'

Series Color

The characters specified by series will be displayed in the terminal's current foreground color. This can be overwritten with the color argument.

color can be specified as None, a string or, an iterable of three integers, 0 - 255, describing an RGB color.

For backward compatibility, a color can be expressed as an integer 0 - 255, but this is deprecated in favor of named or RGB colors.

Compound colors, such as 'white_on_seagreen', 'bold_red', or 'underline_on_peru' are also supported.

If a terminal is not capable of 24-bit color, and is given a color outside of its range, the color will be downconverted to a supported color.

Valid colors for 8 color terminals:

black

blue

cyan

green

magenta

red

white

yellow

Additional colors for 16 color terminals:

bright_black

bright_blue

bright_cyan

bright_green

bright_magenta

bright_red

bright_white

bright_yellow

See this chart for a complete list of supported color strings.

Note

If an invalid color is specified, an AttributeError will be raised

Format

If total is None or count becomes higher than total, the counter format will be used instead of the progress bar format.

Default counter format (counter_format):
'{desc}{desc_pad}{count:d} {unit}{unit_pad}{elapsed}, {rate:.2f}{unit_pad}{unit}/s]{fill}'

# Example output
'Loaded 30042 Files [00:01, 21446.45 Files/s]                                    '
Default progress bar format (bar_format):
'{desc}{desc_pad}{percentage:3.0f}%|{bar}| {count:{len_total}d}/{total:d} [{elapsed}<{eta}, {rate:.2f}{unit_pad}{unit}/s]'

# Example output
'Processing    22%|█████▊                   |  23/101 [00:27<01:32, 0.84 Files/s]'
Available fields:

count(int) - Current value of count

desc(str) - Value of desc

desc_pad(str) - A single space if desc is set, otherwise empty

elapsed(str) - Time elapsed since instance was created

interval(float) - Average seconds per iteration (inverse of rate)

rate(float) - Average iterations per second since instance was created

unit(str) - Value of unit

unit_pad(str) - A single space if unit is set, otherwise empty

Additional fields for bar_format only:

bar(str) - Progress bar draw with characters from series

eta(str) - Estimated time to completion

len_total(int) - Length of total when converted to a string

percentage(float) - Percentage complete

total(int) - Value of total

Additional fields for counter_format only:

fill(str) - Filled with fill until line is width of terminal. May be used multiple times. Minimum width is 3.

Additional fields when subcounters are used:

count_n (int) - Current value of count

count_0(int) - Remaining count after deducting counts for all subcounters

percentage_n (float) - Percentage complete (bar_format only)

percentage_0(float) - Remaining percentage after deducting percentages for all subcounters (bar_format only)

Note

n denotes the order the subcounter was added starting at 1. For example, count_1 is the count for the first subcounter added and count_2 is the count for the second subcounter added.

Additional fields when add_subcounter() is called with all_fields set to True:

eta_n (str) - Estimated time to completion (bar_format only)

interval_n(float) - Average seconds per iteration (inverse of rate)

rate_n (float) - Average iterations per second since parent was created

User-defined fields:

Users can define fields in two ways, the fields parameter and by passing keyword arguments to Manager.counter() or Counter.update()

The fields parameter can be used to pass a dictionary of additional user-defined fields. The dictionary values can be updated after initialization to allow for dynamic fields. Any fields that share names with built-in fields are ignored.

If fields are passed as keyword arguments to Manager.counter() or Counter.update(), they take precedent over the fields parameter.

Offset

When offset is None, the width of the bar portion of the progress bar and the fill size for counter will be automatically determined, taking into account terminal escape sequences that may be included in the string.

Under special circumstances, and to permit backward compatibility, offset may be explicitly set to an int value. When explicitly set, automatic detection of escape sequences is disabled.

Instance Attributes

count¶

int - Current count

desc¶

str - Description

elapsed¶

float - Time since start (since last update if count`equals :py:attr:`total)

enabled¶

bool - Current status

manager¶

Manager - Manager Instance

position¶

int - Current position

total¶

int - Total count when complete

unit¶

str - Unit label

add_subcounter(color, count=0, all_fields=False)¶

Parameters:	color (str) -- Series color as a string or RGB tuple see Series Color count (int) -- Initial count (Default: 0) all_fields (bool) -- Populate `rate`, `interval`, and `eta` formatting fields (Default: False)
Returns:	Subcounter instance
Return type:	`SubCounter`

Add a subcounter for multicolored progress bars

clear(flush=True)¶

Parameters:	flush (bool) -- Flush stream after clearing bar (Default:True)

Clear bar

close(clear=False)¶

Do final refresh and remove from manager

If leave is True, the default, the effect is the same as refresh().

color¶

Color property

Preferred to be a string or iterable of three integers for RGB. Single integer supported for backwards compatibility

fill¶: Fill character used in formatting

format(width=None, elapsed=None)¶

Parameters:	width (int) -- Width in columns to make progress bar elapsed (float) -- Time since started. Automatically determined if `None`
Returns:	Formatted progress bar or counter
Return type:	`str`

Format progress bar or counter

refresh(flush=True, elapsed=None)¶

Parameters:	flush (bool) -- Flush stream after writing bar (Default:True) elapsed (float) -- Time since started. Automatically determined if `None`

Redraw bar

subcount¶: Sum of counts from all subcounters

update(incr=1, force=False, **fields)¶

Parameters:	incr (int) -- Amount to increment `count` (Default: 1) force (bool) -- Force refresh even if `min_delta` has not been reached fields (dict) -- Fields for for formatting

Increment progress bar and redraw

Progress bar is only redrawn if min_delta seconds past since the last update

class enlighten.StatusBar(*args, **kwargs)¶

Parameters:

enabled (bool) -- Status (Default: True)
color (str) -- Color as a string or RGB tuple see Status Color
fields (dict) -- Additional fields used for formating
fill (str) -- Fill character used in formatting and justifying text (Default: ' ')
justify (str) -- One of Justify.CENTER, Justify.LEFT, Justify.RIGHT
leave (True) -- Leave status bar after closing (Default: True)
min_delta (float) -- Minimum time, in seconds, between refreshes (Default: 0.1)
status_format (str) -- Status bar format, see Format

Status bar class

A StatusBar instance should be created with the Manager.status_bar() method.

Status Color

Color works similarly to color on Counter, except it affects the entire status bar. See Series Color for more information.

Format

There are two ways to populate the status bar, direct and formatted. Direct takes precedence over formatted.

Direct Status

Direct status is used when arguments are passed to Manager.status_bar() or StatusBar.update(). Any arguments are coerced to strings and joined with a space. For example:

status_bar.update('Hello', 'World!')
# Example output: Hello World!

status_bar.update('Hello World!')
# Example output: Hello World!

count = [1, 2, 3, 4]
status_bar.update(*count)
 # Example output: 1 2 3 4

Formatted Status

Formatted status uses the format specified in the status_format parameter to populate the status bar.
'Current Stage: {stage}'

# Example output
'Current Stage: Testing'
Available fields:

elapsed(str) - Time elapsed since instance was created

fill(str) - Filled with fill until line is width of terminal. May be used multiple times. Minimum width is 3.

Note

The status bar is only updated when StatusBar.update() or StatusBar.refresh() is called, so fields like elapsed will need additional calls to appear dynamic.

User-defined fields:

Users can define fields in two ways, the fields parameter and by passing keyword arguments to Manager.status_bar() or StatusBar.update()

The fields parameter can be used to pass a dictionary of additional user-defined fields. The dictionary values can be updated after initialization to allow for dynamic fields. Any fields that share names with available fields are ignored.

If fields are passed as keyword arguments to Manager.status_bar() or StatusBar.update(), they take precedent over the fields parameter.

Instance Attributes

elapsed¶

float - Time since start

enabled¶

bool - Current status

manager¶

Manager - Manager Instance

position¶

int - Current position

clear(flush=True)¶

Parameters:	flush (bool) -- Flush stream after clearing bar (Default:True)

Clear bar

close(clear=False)¶

Do final refresh and remove from manager

If leave is True, the default, the effect is the same as refresh().

color¶

Color property

Preferred to be a string or iterable of three integers for RGB. Single integer supported for backwards compatibility

fill¶: Fill character used in formatting

format(width=None, elapsed=None)¶

Parameters:	width (int) -- Width in columns to make progress bar elapsed (float) -- Time since started. Automatically determined if `None`
Returns:	Formatted status bar
Return type:	`str`

Format status bar

justify¶: Maps to justify method determined by justify parameter

refresh(flush=True, elapsed=None)¶

Parameters:	flush (bool) -- Flush stream after writing bar (Default:True) elapsed (float) -- Time since started. Automatically determined if `None`

Redraw bar

update(*objects, **fields)¶

Parameters:	objects (list) -- Values for Direct Status force (bool) -- Force refresh even if `min_delta` has not been reached fields (dict) -- Fields for for Formatted Status

Update status and redraw

Status bar is only redrawn if min_delta seconds past since the last update

class enlighten.SubCounter(parent, color=None, count=0, all_fields=False)¶

A child counter for multicolored progress bars.

This class tracks a portion of multicolored progress bar and should be initialized through Counter.add_subcounter()

Instance Attributes

count¶

int - Current count

parent¶

Counter - Parent counter

update(incr=1, force=False)¶

Parameters:	incr (int) -- Amount to increment `count` (Default: 1) force (bool) -- Force refresh even if `min_delta` has not been reached

Increment progress bar and redraw

Both this counter and the parent are incremented.

Progress bar is only redrawn if min_delta seconds past since the last update on the parent.

update_from(source, incr=1, force=False)¶

Parameters:	source (`SubCounter`) -- `SubCounter` or `Counter` to increment from incr (int) -- Amount to increment `count` (Default: 1) force (bool) -- Force refresh even if `min_delta` has not been reached

Move a value to this counter from another counter.

source must be the parent Counter instance or a SubCounter with the same parent

Functions¶

enlighten.get_manager(stream=None, counter_class=Counter, **kwargs)¶

Parameters:	stream (file object) -- Output stream. If `None`, defaults to `sys.stdout` counter_class (class) -- Progress bar class (Default: `Counter`) kwargs (Dict[str, Any]) -- Any additional keyword arguments will passed to the manager class.
Returns:	Manager instance
Return type:	`Manager`

Convenience function to get a manager instance

If stream is not attached to a TTY, the Manager instance is disabled.

Constants¶

class enlighten.Justify¶

Enumerated type for justification options

CENTER¶: Justify center

LEFT¶: Justify left

RIGHT¶: Justify right

Overview¶

Enlighten Progress Bar is a console progress bar module for Python. (Yes, another one.) The main advantage of Enlighten is it allows writing to stdout and stderr without any redirection.

The code for this animation can be found in demo.py in examples.